1. mbinks89

    mbinks89 Active Member

    Joined:
    Nov 14, 2012
    Messages:
    548
    Likes Received:
    27
    Location:
    Montreal

    Security System Questions

    Discussion in 'Setting Development' started by mbinks89, Jul 16, 2013.

    Would a security system sound if someone broke a window and gained access to a house that way? Or is it just for the door? Also, anybody with law enforcement background, please PM, I'm writing a novel which deals with a criminal and want my facts straight -- there'll be rep in it for you.
     
  2. Wreybies

    Wreybies Thrice Retired Supporter Contributor

    Joined:
    May 1, 2008
    Messages:
    23,826
    Likes Received:
    20,815
    Location:
    El Tembloroso Caribe
    You can have both. There are security systems that offer glass break sensors and door sensors. It depends on what you purchase when you get into the system, but both kinds of sensors exist. ;)
     
  3. Steerpike

    Steerpike Felis amatus Contributor

    Joined:
    Jul 5, 2010
    Messages:
    13,984
    Likes Received:
    8,557
    Location:
    California, US
    Yeah, could be either. Systems are often installed around windows. Often, they have a sensor with two pieces - one on the window and one of the frame. When the window is opened, it sends a signal to the alarm. If you're looking more at glass breaking, they have sensors designed to detect the sound of breaking glass, and when they hear it they send a signal to the alarm. All of these can be used in conjunction.
     
  4. mbinks89

    mbinks89 Active Member

    Joined:
    Nov 14, 2012
    Messages:
    548
    Likes Received:
    27
    Location:
    Montreal
    Hm, okay, thanks. Does it seem too coincidental if my MC breaks into a house via the window and the alarm doesn't go off?
     
  5. Steerpike

    Steerpike Felis amatus Contributor

    Joined:
    Jul 5, 2010
    Messages:
    13,984
    Likes Received:
    8,557
    Location:
    California, US
    No. A lot of people don't get those window break sensors in their homes. I see them used more by businesses. Breaking the window wouldn't trip the most commonly-used window sensors, which are used to sense whether the window is physically opened. People do use the glass-break sensors in their home, but it certainly wouldn't be unusual for a home with a security system not to have them. It's probably the more common option, in fact.
     
  6. mbinks89

    mbinks89 Active Member

    Joined:
    Nov 14, 2012
    Messages:
    548
    Likes Received:
    27
    Location:
    Montreal
    ^Sweet, thanks for all the help.
     
  7. Cogito

    Cogito Former Mod, Retired Supporter Contributor

    Joined:
    May 19, 2007
    Messages:
    36,161
    Likes Received:
    2,827
    Location:
    Massachusetts, USA
    There are all kinds of security systems. Perimeter alarms protect entry points, such as doors, windows, and skylights. There are also area alarms such as ultrasonic or optical motion sensors. Thermal sensors can register body heat, but they can also assist in fire detection.

    In addition to alarms, security systems can also switch on surveillance cameras and recorder, so even if no immediate alert is sounded, a records can be available for review.
    The protected space is often divided into zones, so intrusions can be tracked by more than an overall alarm/no-alarm condition.
     
  8. B93

    B93 Active Member

    Joined:
    Jul 23, 2012
    Messages:
    302
    Likes Received:
    33
    I haven't noticed lately, but I used to see a lot of windows with a thin conductive strip or tape on the glass, so if the glass was broken it would open a circuit.
     
  9. Cogito

    Cogito Former Mod, Retired Supporter Contributor

    Joined:
    May 19, 2007
    Messages:
    36,161
    Likes Received:
    2,827
    Location:
    Massachusetts, USA
    It's rather low-tech, and fairy easy to defeat. You can usually cut an opening in the glass without breaking the strip. Sometimes you can bridge the contacts so that even if the strip is broken, the alarm doesn't sound.

    Vibration sensors mounted on the glass are much harder to defeat.
     
  10. iolair

    iolair Active Member

    Joined:
    Feb 16, 2009
    Messages:
    263
    Likes Received:
    4
    Location:
    Exeter, UK
    The most common type of sensor used in domestic security systems is a motion detector - most houses with an alarm would just have one, in the main hallway, and maybe sensors on the ground floor doors.

    So, if your character is just breaking in to a standard house, going through the window, and avoiding the hallway, he may well avoid setting the alarm off. The more security-conscious the home owner is, though, the more sensors there are likely to be (upstairs hallway motion detector, ground floor windows would be the next ones generally added.) But still, in most homes even with reasonable electronic security, if you broke directly in through an upstairs window to access that room and didn't go any beyond the room you entered, the chances are there wouldn't be any sensors covering it.
     
  11. josesmith

    josesmith New Member

    Joined:
    Jul 17, 2013
    Messages:
    1
    Likes Received:
    0
    I think the most common used sensors are reed switch or door sensor. These sensors are cheap but 100% reliable. For the security system, there are wide range of different kinds of intrusion sensors for selection, which including magnetic contact (reed switch), PIR motion sensor, Dual-tech motion sensor, glass break sensor, vibration sensor, perimeter beam sensor...etc. Each of sensor with its advantages and disadvantages, suitable for different application or installation environment. Typically, when the sensor is triggered, it will send the signal to alarm panel, alarm panel will trigger the alarm immediately.
     
  12. mammamaia

    mammamaia nit-picker-in-chief Contributor

    Joined:
    Nov 21, 2006
    Messages:
    19,150
    Likes Received:
    1,034
    Location:
    Coquille, Oregon
    depends on how it's set up... windows are frequently included in the system and if broken can set off the alarm... doors are always wired and motion detectors are also frequently included...

    i had such a system when i lived in an upscale part of las vegas, so am speaking from first-hand knowledge...
     
  13. TLK

    TLK Active Member

    Joined:
    Apr 2, 2013
    Messages:
    272
    Likes Received:
    36
    This could be quite a good option for the MC then. If he/she breaks into houses fairly regularly, or does dabble in a bit of petty theft, this could be used to show it and having to defeat a small circuit is still more exciting than "The MC broke the window and clambered in"
     
  14. Pythonforger

    Pythonforger Carrier of Insanity

    Joined:
    Nov 14, 2010
    Messages:
    403
    Likes Received:
    14
    Location:
    Amongst the Mortals
    Or maybe "MC smiled as he saw the sensor strip. Easiest things in the world to beat, these things. A small rod would bridge the circuit and render it useless." to show off his expertise?
     
  15. sunwave

    sunwave Member

    Joined:
    Nov 23, 2010
    Messages:
    37
    Likes Received:
    4
    For someone who just practices some petty theft, but does have a bit of experience, the most common thing would be to look for a diffrent point of entry if they found a sensor. For example, if s/he sees a sensor strip on a window on the groudn floor, s/he'd probably try to enter an upstairs window instead (via a garage roof or whatever) to AVOID the sensor. Much easier (and thus less risky) than trying to bypass a sensor.
     
  16. TLK

    TLK Active Member

    Joined:
    Apr 2, 2013
    Messages:
    272
    Likes Received:
    36
    A fair point.

    But maybe the MC is arrogant, and loves to test his skills... :p
     
  17. u.v.ray

    u.v.ray New Member

    Joined:
    Jun 24, 2013
    Messages:
    39
    Likes Received:
    2
    Location:
    U.K
    In addition to what has already been said...

    Before he/she even gets to the windows, a burglar should be very wary of Garden Mines. Indeed, there are many ingenious security systems on the market.

    :D
     
  18. BMacKay40

    BMacKay40 New Member

    Joined:
    Aug 2, 2013
    Messages:
    31
    Likes Received:
    0
    Location:
    USA/ Southeast
    If they get past the door and window sensors, you're still going to have to deal with motion detectors. Pretty much every home alarm system has motion detectors as well, and they are sensitive little buggers. The question I have for you is; what is it that you want your MC to do? Do you WANT him/her to get around an alarm, or not? If you do... make up some kind of invention that would disable the system, regardless of how sophisticated it is. If not, then, well-- that's easy.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice